Sewer blockages can be annoying, but if you understand what is happening and treat them early with the help of Apofraxeis Anagnostou technicians, they are relatively easy to correct and you may be able to avoid more serious leaks, overflows or electrical damage.
Why do the sewer pipes become clogged?
Here we have to separate the 3 main points in our space where this is done and put the causes separately:
1. Obstructions in the kitchen
We have seen it many times even in the news the reports of fats that can cause huge public sewerblockages, with the result that sewage accumulates in houses and streets. The things that must be put in the trash and create blockages in the kitchen drains are:
Fat And Oil. The bad habit of throwing cooked potato oil in the sink is one of the most serious problems. Grease and oil can be a liquid when entering a sewer, but it soon cools down there and will thicken quickly. It will become a sticky solid mass that adheres to the walls of the pipes and attaches more waste to it. It’s a must have, for any Affiliate, promoting any program. The recommended solution is to use a fat trap (a disposable lined container) to dispose of used oils and fats. Alternatively keep a mini bin in the kitchen for food waste – it is healthy for both the pipes and the planet! Food leftovers from dishes and pans. Hair of all shapes. Hair from both humans and pets is also an important barrier to tubing. The simplest way to prevent blockages and blockage of drains from creating hair is to install grids and filters in all your ducts . Especially in the shower and bath pipes. A grid in the kitchen sink will also trap food waste from washing. They are easy to clean – just make it a habit to empty them regularly. Coffee beans. Yes. because some wonderful compounds are created based on coffee something like organic glue. Coffee beans look like a harmless, free product to rinse in the sink. However, you may be surprised to learn that they are a high risk factor for blockages. Discard them – along with other food waste, such as rice and pasta – in the food waste bin Kitchen rolls and papers.
2. Obstructions in the toilet
Makeup cleaning products
Baby wipes (even if they say “flushable”)
Plaster and bandages
Tampons and applicators (plastic and cardboard)
Hygiene and incontinence items
Fibrous materials . Items such as wet wipes, floss, cotton and feminine hygiene items should be discarded in the bin and not flushed down the toilet. They can easily get stuck in rough places in drains and accumulate in possible blockages.
VERY DANGEROUS MATERIALS – ATTENTION SOS
Pharmaceuticals and chemicals
Engine oil, paints, battery fluids and solvents must be disposed of safely in accordance with local regulations. They should never be introduced into the water supply where they can damage our groundwater and be toxic to plants and wildlife. Return unused medicines to a pharmacist for safe disposal
3. Outdoors blockages
It goes without saying that you should always try to keep the pipes in your yard free of leaves, foliage, twigs, stones or other garden debris that could enter the sewer and cause blockages.
Regularly sweeping your garden, and using leaf compost is one way to prevent clogging of these pipes and tubing. It is also good to check regularly, if you have an external septic tank, its height. Monthly maintenance and cleaning of cesspools must be done on time.
If blockages occur frequently and you are taking care of all of the above then you may need to seek help from a specialized blockage company. Because the problem can be mechanical (poor gravity of the piping) to identify the cause and relieve the blockage.
There are some techniques that a drainage expert will use. Including the use of CCTV, ie piping control camera. (see also the article blockages with a camera ) to take a closer look at the blockage company and to identify the difficult and inaccessible points of the sewer to see what has blocked the flow of water. Professional obstructors can also advise you on what you need to do in the future to prevent this from happening again.
Tips for keeping your drains clean
Educate your family on what is safe and unsafe to dispose of in sewer pipes. It is also a good idea to use some simple regular cleaning procedures.
A handful of baking soda in the sewer. Followed by a kettle of hot (not boiling) water, it will help dissolve and relax any fats that have begun to accumulate.
A cup of vinegar will work the same way.
Buy an obstructive spiral for your home. A long, flexible tool – to remove accumulations and disconnect the early accumulation.
Most blockages can be avoided. However, if the sewer pipes become blocked, seek professional help immediately. The Apofraxeis Anagnostou unblocking company has a specialized workforce. It can handle all blockage issues and offer a range of blockage related servicesin your home.
How do couples manage disagreement over sexual desire?
People differ significantly in the degree of sexual desire as escorts claim. What strategies do couples use to negotiate differences in their sexual desire?
There is nothing conventional about sex in relationships, nor do we need to focus on average studies because it blurs the great diversity of human sexual experience. Thus, we lose the meaning, if, for example, we wonder how often couples “should” have sex.
While some people think that having sex once or twice a month is enough to make a connection with their partner, others need it daily or even more often. In other words, people differ significantly in the degree of sexual desire.
Also, even on an individual level, we may experience differences in sexual desire. Some days we feel an ardent need for sex, while other days not so much. And there are those days when we have no appetite for sex. This wide variety of differences, both between partners and on an individual level, is the only normal thing about sexual desire.
What strategies do couples use to negotiate?
Based on these differences, it is inevitable for couples to experience disagreement in sexual desire. In fact, this is one of the most common reasons couples seek couple treatment. However, with or without help, couples find ways to negotiate differences in their sexual desire, although some of them tend to be more satisfied.
To clarify this issue, Athens escorts asked 229 adults in a stable relationship to describe the strategies they use to deal with sexual dysfunction.
Initially, partners responded to questionnaires that aimed to assess their overall levels of sexual satisfaction, relationship satisfaction, and sexual desire. The escort girls found no gender differences in sexual and relational satisfaction. However, men reported higher levels of sexual desire than their partners, which is consistent with the previous questionnaire.
Sex partners were then asked to report the strategies they use to negotiate differences in sexual desire with their partners. They also rated how satisfied they were with each strategy they use. This was an open-ended question, as the escorts in Athenswanted to gather as many strategies as possible.
The call girls then conducted a content analysis, based on which they were able to group all the strategies mentioned in five areas and which were categorized based on the level of sexual activity they involved. It is important to note that for questionnaire purposes, “sex” was defined as intercourse. The following are the findings of the questionnaire:
The partner with the lowest sexual desire rejects the other partner’s attempts for sexual intercourse or even complains about them, while the partner with the highest sexual desire either gives up or directs his thoughts to non-sexual activities such as exercise or hobbies.
While 11% of Athens ladies reported distancing themselves from their partners, only 9% of them considered it a strategy that led to satisfactory results. Of all the strategies for managing differences in sexual desire, distancing is by far the least helpful. It also tends to cause significant problems in the relationship in the long run.
The couple discusses the reasons for the disagreement regarding the sexual experience and tries to find a compromise solution, such as planning sex for another moment. Only 11% of respondents said they used this strategy, but 57% said it had proven useful.
Couples bond more when they can communicate openly and honestly their feelings and desires and may also be able to resolve their differences by doing so.
However, trying to communicate can lead to frustration if the partners become defensive or do not feel comfortable talking about sexual problems.
Engaging in activities without a partner
This category included activities such as masturbating, watching pornography, and reading romance or romance novels.
About 27% of respondents viewed sexual rejection in this way, and about 46% of them considered it a useful strategy. Indeed, more than half of the participants cited masturbation as one of the strategies they use, even if it was not the approach they often used.
As a temporary solution to the temporary mismatch in sexual desire, self-stimulation was cited as a pretty good solution. However, feelings of bitterness are likely to arise when a partner feels that this is the only way to satisfy his or her sexual needs.
Engaging in joint activities
These include activities such as cuddling, massage, and showering together that may or may not lead to sex. Alternatively, the partner with the lowest desire may offer a different sexual activity, such as masturbation or oral sex. More than a third of partners (38%) said they used this approach, while 54% of them said it led to satisfactory results.
Even non-sexual activities, such as cooking a meal together or holding hands while walking in the park, are important bonding experiences that can unite couples and help the partner with the least desire to regain sexual interest in the other half.
Participation in sexual activity, whatever it is
In some couples, the partner with the lowest sexual desire may offer a “quick intercourse” instead of “normal sex“. Some people give in to sex even if they are not in the mood and often get irritated during the process.
Partners who reported using this approach expressed their belief in the importance of sex in a relationship and their desire to meet the needs of their partner. Although only 14% of respondents said they used this approach, 58% said they were happy with the results.
This questionnaire shows that couples use a variety of strategies to deal with differences in their sexual desires and that each of them can be quite effective in solving the problem.
The only exception is distancing, which is detrimental to the relationship, especially when it becomes common practice. If you find that you are rejecting your partner’s approaches, you need to communicate the reasons for your lack of interest and offer your partner non-sexual alternatives for connection.
You also need to be open to the possibility that your sexual desire will return as soon as your other emotional and relationship needs are met.
Similarly, if you find that your sexual approaches are interrupted on a repetitive basis, you need to open a channel of communication with your partner, not cut him off.
In addition, it is important to keep in mind that listening is much more important than talking if you want to understand where your partner’s behavior comes from. As you meet his other needs, you may find that he approaches you more sexually.
There are many reasons why you might want to hide your IP address with the help of our company MyIp, experts in web hosting, from having discounted airfare to accessing content that is not available in your home country. This allows you to unblock Netflix libraries in many different countries, as well as platforms such as Hulu and BBC iPlayer, which are blocked in many parts of the world .
It is also a great way to protect your privacy and prevent your personal information from falling into the hands of advertisers, hackers and others.
What is an IP Address?
An Internet Protocol (IP) address is a unique set of numbers and decimals used to identify each device connected to the Internet . Each device that is connected to a computer network has its own unique IP address. But if you have connected several devices through a WiFi router, then their IP addresses are the same.
When you visit a website, your device sends a request to the website server using the website’s IP address. The request returns with the information you requested using your own IP address.
There are two types of IP addresses. IPv4 (Internet Protocol version 4) addresses consist of four two-digit or three-digit numbers separated by periods (for example 18.104.22.168). IPv6 (Internet Protocol version 6) addresses are much larger and include uppercase and lowercase letters and numbers.
The IPv6 protocol is being developed because the number of available IPv4 addresses is running low. It also has more efficient routing and data flow than IPv4, as well as improved security. But in most of the world the use of IPv4 is still prevalent and the transition to IPv6 is not an easy process.
If you want to switch to IPv6, your ISP (Internet Service Provider), router, and operating system must be compatible with it. Unfortunately, most ISPs do not yet support IPv6 .
If you want to see your own IP address right now, you can easily use our tool to check your IP . I used it to check my IP address with and without VPN.
Your IP address has not been assigned to you by chance. A non-profit organization called the Internet Assigned Numbers Authority generates IP addresses and gives them to the five regional Internet registries around the world (RIR). These regional registries then assign IP addresses to ISPs in their area.
This means that your IP address can be used to locate your location .
Because your computer and other devices need an IP address to access information on the Internet, there is no way you can avoid using an IP address. The only way to hide your real IP address is to disguise it with a different one.
Why Hide My IP Address?
The fact that you give your real IP to every website you visit can threaten the security of your privacy and anonymity on the internet .
This is because your IP address can easily be used to identify your location – sometimes with a frightening level of accuracy. Hiding your IP prevents you from being detected. This is especially important if you are going to use torrents or any other activity located in the gray area of legality.
But even if you just browse, revealing your location has consequences . Various websites and advertisers can use this data to target you in order to benefit from your online activity.
For example, airlines and travel companies change their prices based on the location of your IP address. You may be shocked at how much airfare can vary because of the location you appear to be in.
Another reason for hiding your IP address is to bypass the restrictions of various websites, ISPs, government agencies, workplaces, and even schools . A common example is Netflix, which uses your IP address to identify content that you can watch.
If you do not hide your IP address, you will only be able to view your Netflix library from your actual location. But if you want to bypass the restrictions of a country and access content from all over the world , hiding your IP will help you achieve this.
9 Ways to Hide Your IP Address
1. Use a VPN
This is the best and most reliable way to hide your IP . All you have to do is select one of the top VPN services, download the VPN and then choose which country you want to connect to. The VPN will assign you a virtual IP address associated with this country and effectively hide your real location .
One of the biggest advantages of using a VPN is the fast connection speed . Unlike other methods, you do not have to worry about browsing, streaming or downloading content too late.
This is especially important if you want to watch content on Netflix or other platforms. These sites are great at detecting when users are trying to bypass their restrictions and will not hesitate to block you. But the best VPNs can easily bypass even the strictest geographical restrictions .
VPNs are also the safest way to download torrents. In addition to hiding your IP address and protecting your privacy, some VPN providers offer dedicated servers for torrents and P2P profiles.
In general, VPNs are incredibly secure if you choose a trusted service that uses advanced security profile. This will protect your IP from leaks.
The best VPNs on the market ask you to pay a subscription, but it’s really worth it. While there are some pretty good free VPNs , these are very few and usually offer slow connection, low bandwidth and data transfer. Some free VPNs may even put you at risk for data theft, malware attacks and other security threats.
In my opinion, it is necessary to invest in a chargeable VPN like the ones we present to you below. Just a few extra dollars a month is the small price you have to pay when it comes to protecting your privacy. The VPNs that we offer you offer money back guarantees, so that you can try their services without any financial risk on your part.
2. Proxy – Slow and Unsafe Download Torrents
Proxies are commonly used to access content with geographical restrictions. Suppose you want to see something that is only available in a specific country. Your computer sends a request to the site to see it, but the proxy corrupts the request and resends it using an IP address from that country . When the proxy server gains access, it sends it back to you – that’s it!
There are several drawbacks to proxies: they are very slow and not very secure because they do not encrypt your traffic like VPNs do. Also, they do not work well for downloading torrents , as they do not hide all your activity from your ISP (your ISP). In addition, many popular sites, such as Hulu, can easily tell when you are using a proxy and block your access.
3. Tor – Covers your IP for Free (Not for Streaming or Downloading Torrents)
If you want to remain completely anonymous online without paying a penny, Tor is a solid solution. It consists of a large network of servers run by volunteers around the world. When you use Tor, your traffic goes through several of these servers and is often encrypted, making it almost impossible for anyone to track your traffic and locate your IP.
However, all of this encryption and decryption makes Tor incredibly slow, so it’s not at all useful for streaming or downloading – and its developers advise against using it for torrents. If you just want to browse the web, you can use Tor Browser or download the Firefox extension. However, in order to have the highest possible level of protection of your privacy, I suggest you use Tor in conjunction with a VPN .
4. WiFi Network – A Dangerous Last Solution
Your IP address is assigned to you by your ISP, so if you connect to the Internet through a different network, you will be assigned a new IP. If you want to quickly and temporarily change your IP , you can go to a cafeteria or any other place where there is a public WiFi network. Because this is a shared connection, your activity could not lead to your location.
However, connecting to a public WiFi makes you vulnerable to hacker attacks, malware, and all sorts of security threats. I always recommend using a VPN when connecting to a public WiFi network. Plus, a WiFi network won’t help you get around geographical constraints – so it’s more of a quick fix than a long-term solution.
5. Use Your Mobile Network – A Temporary Solution
If you do not have easy access to a public WiFi connection – or you just do not want to take all the risks involved – you can also temporarily change your IP using the data you have on your mobile instead of connecting to a WiFi .
The biggest disadvantage of this method is that it can be expensive, especially if you want to stream or download a lot of content. But again, this is a solution that can not be permanent and I only recommend it if you think your normal IP address is exposed . If so, using your mobile network is an easy way to get a new IP right away.
6. Disconnect Your Modem – Refresh your IP Address
This may sound silly, but sometimes unplugging your modem for a while can really change your IP address. When you disconnect from your ISP (your ISP), the link to your existing IP is deleted – but only if your ISP uses dynamic IP addresses (which is most likely).
Leave your modem disconnected for as long as you can, as this increases the chance that your IP will change. When you reconnect it, you will need to have a new IP. However, this is not the most reliable method and therefore should not be your first choice.
7. Refresh Your IP Address – Follow These Steps
As I mentioned above, your primary IP address is publicly visible, but if you use a WiFi network or an Ethernet cable, you can also have a private IP address. This method only works to replace private IP , not public IP.
8. Use a NAT Firewall – Hide Your Private IP Address
Like the previous method, this option only applies to your private IP address. A Firewall NAT (Network Address Translation) allows different devices to hide their own IP address and use all the same public IP address. In other words, many devices connected to the same router can share a public IP address.
The main advantage of NAT is that it protects you from receiving unwanted communication from unknown internet users, which can be malicious. However, it does not hide the public IP address of your device , which is even more important when it comes to protecting your privacy online. As I mentioned before, the best way to hide your IP is with a VPN.
9. Ask Your ISP to Change It for You – Ask Kindly
Because your ISP (Internet Service Provider) is the one giving you your IP, you can simply ask them to change it . You should contact his service directly and provide your account details. This is an easy and simple way to change your IP, but it’s not going to solve geographical constraints or security issues like a VPN would .
Remember that if your ISP uses dynamic IP addresses, your address will change again at some point in the future . If you want it to stay the same, you can ask for a static IP address – but this usually costs extra and requires extra effort.
Dairy products like Greek yogurt is famous and stands out for its quality and taste around the world. The recipe is so simple !!! A little fresh milk of good quality, a little yogurt yeast, a warm environment and 3 waiting eggs are enough to taste pure, tasty, traditional yogurt from your hands !!!!
Here you will find all the secrets I learned to make yogurt in the traditional way. How to achieve the perfect skin, how to check the right temperature without a thermometer, when is the right time to add yogurt yeast and how to make your own strained yogurt!
The only thing that will make your yogurt different from the yogurt of your grandparents, when their yogurt coagulated from their “live” ones, is the utensil that you will thicken. They put it in a bag or in a clay pot. If they have left you as a dowry, then even better !!!! Time to use them.
Tip: Get fresh sheep’s milk from the trade or if you are lucky, milk the sheep in the herd and thicken your own yogurt with fresh milk. Sheep’s milk has a higher fat and protein content than goat’s and cow’s milk. It has better density, texture and skin. If you get milk from the trade, make sure it is fresh (short-lived) and full of fat.
The ingredients of the traditional yogurt
There are only two things you will need to make toy own traditional yogurt:
Step 1: Milk the milk and pass it through a sieve to filter. We start the process of making yogurt immediately. Fresh milk is affected by high temperatures and can become sour if not used immediately or stored properly. In case it becomes sour, “cut” as the old saying goes, it is not suitable for making yogurt or cheese – feta.
(If our milk is commercial we skip the first step.)
Step 2: Place the milk in a saucepan. Turn on the stove at low volume. It is very important that the milk heats up slowly. If the milk boils, “rolls” as your grandmother would tell you, then we will not be able to thicken the yogurt.
Stir gently constantly with a wooden utensil, touching the bottom of the pot so that the milk does not stick.
As the milk heats up we notice that it evaporates, a thin foam is created on its surface and its smell changes, it becomes sweeter and more muscular. We make sure that the temperature of the milkdoes not exceed 80 or at most 95 degrees Celsius and in no case do we let the milk heat up to boiling point. We just want it to steam and not booze.
Stir until the foam thickens on the surface. This process takes about 45 minutes.
Step 3: Remove the milk from the stove and let it cool until its temperature reaches 40-50 degrees Celsius depending on the season. (In the warm months this temperature ranges from 40 to 45 degrees Celsius. In the cold months when the temperature of the milk is more difficult to maintain it is better to thicken it at a temperature of 45 to 50 degrees Celsius.)
We take 5 tbsp. milk separately and add 1 tbsp. yogurt yeast. Stir until well blended. Add the solution to the milk and mix well.
Step 4: Transfer the mixture to a bowl, preferably to a clay pot. Pour it finely and as it falls, foam is formed. This is a trick to make our yogurt a better skin.
Cover with a clean blanket to maintain its temperature. We make sure we have a warm environment. Our yogurt will be ready in 3 hours. If it gets cold it may take longer to thicken, maybe an entire night. In case the yogurt is slow to thicken, it acquires a sour taste.
If the temperature is kept constant, it will thicken quickly and the yogurt will have a sweeter taste. In the winter months when the room temperature is low enough to keep the yogurt warm, we can place it in an oven preheated to 50 degrees Celsius. Once we place the yogurt in the oven, our oven is off. To be sure that the oven will be kept warm we can only keep the light on.
Once the yogurt thickens, we can remove the whey or otherwise “whey”, therefore make it drained with a denser texture. The process is very simple.
Place the yogurt in a tulip – bag or in a colander with dense holes (eg tea).
Support it so that it floats and place under a utensil to collect the liquids that will be excreted. We leave it like this for about half an hour and our strained yogurt is ready !!!!
What you see in the photo is my strained yogurt from cow’s milk !
With the same preparation process we can thicken yogurt with cow’s or goat’s milk. The result of course will not be the same in texture and density and of course will differ greatly in taste, but this is a matter of preference.
For yogurt yeast we use sheep yogurt with skin as in this yogurt the lactic acid bacteria are active. Commercial yogurts that do not have active bacteria are not suitable for use as yogurt yeast. Make sure that the yogurt yeast does not include the skin because it will be difficult to dissolve it with the milk.
Fresh milk must be pasteurized before it can be consumed in any form in order to destroy possible pathogenic microorganisms that are harmful to our health. To make our yogurt, the milk is heated slowly and steadily to 85 degrees Celsius and thus its pasteurization is achieved at the same time.
If we do not have a thermometer we can understand the temperature of the milk at each stage of preparation empirically. In the simmering phase, adjust the intensity of the stove until the milk is steaming. (Milk begins to steam above 60 degrees Celsius). In the phase where we want to calculate the temperature to drop the rennet dld at 45 to 50 degrees Celsius, it is enough to dip our little finger and withstand the temperature of the milk counting up to 22.
Preserve the yoghurtin the refrigerator from 2 to 5 degrees Celsius . Above 5 degrees Celsius, pathogenic bacteria harmful to our body begin to grow.
Read more about dairy products and dairy machinery:
Toilet leaks aren’t anything to panic over, but no one likes walking into the bathroom with dry socks and coming out with wet socks. Toilets that leak at the base are usually an easy fix with some DIY how-to steps.
You can make the repairs you need quickly using this guide that provides you with the reasons behind your toilet leak, the tools you’ll need, what to do about the leak, and tips to prevent future toilet leaks.
There are several cases where you won’t need to call a plumbing contractor. For instance, plumbing problems like clogged toilets or drains are often easy to fix with a plunger or a drain unclogging agent.
But, what happens if you face a major plumbing issue that you can’t fix yourself? Do you have a plan of action in place? Do you know who to call?
Shower heads are one of those appliances that people tend to overlook and approach as an afterthought.
But when it comes time to complete a home improvement project in your bathroom, the shower often comes up as a good place to start the upgrade. After all, with so many shower head types to choose from, the process of finding the best type to fit your preferences can be tricky.
That’s why it’s important to take the time to make the right decision.
Why Choosing the Right Shower Head Matters
Those standard spigots you saw decades ago seem like a relic of the past when you look at all the different options available today. But before you start shopping, you need to understand the impact shower head types might have on your lifestyle and your wallet.
First of all, you want to make sure you get the shower experience you want. For example, you might prefer a handheld head because you want a convenient option for washing your children, bathing your dogs, and cleaning the tub.
Or perhaps you want a head that saves you big on your water bill. For those who like the finer things in life, massage and other spray patterns are available with certain types of shower heads.
Another aspect most people tend to overlook is how your shower head affects your health. An unfortunate truth often ignored is the fact that shower heads are a perfect environment for pathogenic bacteria and harmful microbes.
Of course, risk of infection is small to nonexistent, but frequent exposure to contaminated water cascading onto your face and body is something you can easily avoid. Make sure you plan for how you will clean your shower head.
Additionally, you also need to consider the cost. Think beyond the price tag of the shower head itself — look at the impact it will have on your water bill. Some outdated shower heads drain your wallet (pun intended) by using up to 10 gallons of water per minute when it’s fully opened. Fortunately, newer shower heads can save you big by using about two or three gallons per minute, thanks to their design.
Ultimately, the total cost of ownership of your shower head comes down to the levels of water pressure it uses.
Low Pressure Shower Heads vs. High Pressure Shower Heads: The Pros and Cons
This topic is likely your primary concern when you’re shopping for the best shower head for your home. Ultimately, your decision comes down to what you want to prioritize — the overall shower experience or your water bill.
Pros and Cons of Low Pressure Shower Heads
A 2016 study found that showers are the second largest source of indoor water use, accounting for about 19 percent of total use per capita per day. It’s no wonder that people turn to low flow shower heads to cut back on their water bills.
The major advantage of using lower pressure shower heads is obvious: Since the head allows smaller amounts of water to flow through it as compared to other heads, the restricted flow ultimately reduces your water use.
The pros are pretty clear. Low pressure shower heads help with the following:
Managing water waste and cutting back on your total water bill.
Reducing your electric bill by using less electricity to warm less water being used.
Decreasing the amount of emissions by saving on energy use.
There are some downsides as well. These include the following:
You will experience a time lag, meaning when you adjust the temperature, it takes longer for that change to come through the head.
Your water will be cooler because low flow heads combine water droplets flowing out with the air, making the water cool quickly, as compared to traditional shower heads.
Simply put, a low pressure shower head can cut costs and provide an environmental benefit, but the experience can be frustrating, especially if you prefer consistent, strong water flows after dealing with poor water pressure in the past.
Pros and Cons of High Pressure Shower Heads
These types of shower heads are useful for increasing water pressure if you find your current head ineffective. Many people prefer a shower experience that delivers high levels of water pressure, especially if they opt for high end heads that include a massage setting.
The advantages of using high pressure shower heads are as follows:
You get a better experience if you prefer a strong water flow.
You’re able to improve temperature control, reducing the lag between turning the knob and actually feeling the water get hotter or colder.
You typically get more options for spray patterns, like a gentle mist, powerful stream, or a pulsating massage.
However, the cons of using these heads mostly boil down to cost.
You might see an increase in your water bill as you use more water.
In turn, your electric bill can increase too as you use more energy to heat your water.
Now that you know the pros and cons of using different levels of water pressure with your shower heads, you’re ready to explore your options.
The Types of Low and High Pressure Shower Heads
Picking the right shower head with the best water pressure comes down to your personal preference. Here are the most common types of shower heads.
Handheld Shower Head
These kinds are attached to the shower elbow through a hose. The head itself can detach from the holder, so the user can extend it off of the wall. Handheld shower heads are especially helpful for cleaning your shower enclosure and bathing your kids and pets.
Some of these come with a lot of extra features, like various spray patterns and massage jets. And many hand held heads can be mounted to sliding bars, making it easy to adjust it to various heights.
Dual Shower Head
Can’t decide between a hand held option or a fixed type? Want the best of both worlds? The dual shower head is your perfect choice.
Typically, these systems offer both a hand held head and a fixed head that is stationary. Dual shower heads include a diverter valve to effectively control water flow. A two way diverter valve will switch flow between the two heads, and a three way diverter valve allows you to choose which individual head to use at one time or to use both heads simultaneously.
Single Spray Shower Head
This type is self-explanatory. It’s a fixed shower head that provides one spray setting, often referred to as a full body spray.
A single spray shower head is the best option for you if you want simplicity.
LED Shower Head
These share the same functionality as the rest of these shower heads. The only difference is that they use LED lights to color the water, which can be relaxing and uplight your mood.
Most LED shower heads come with a variety of color options, but some are single color or offer a random color sequence. Another cool feature — some models use water temperature to adjust the color of the lights.
Rain Shower Head
With this option, you get wide coverage, thanks to the extended width of the head itself. Most rain shower heads are at least six inches wide, making you feel like you’re underneath a rain cloud.
These are mounted on the wall, but some can be installed in the ceiling of the shower enclosure. The water flow is evenly distributed, resulting in a lower pressure with a wide coverage. These are best if you have plenty of water pressure in your home so the head can effectively distribute flow evenly.
When you know your preference for water pressure, finding the best type of shower head is simple. Keep in mind that shower head installation is often simple, but you need to make sure that it’s done correctly.
If your recent DIY home projects have not gone well, it might be worth hiring a professional. This way, you avoid common installation mistakes, which can lead to costly repairs and fixes.
With the right irrigation plumbing system in place, your lawn should be getting uniform watering on a regular basis. A properly installed system is incredibly helpful when it comes to keeping your yard healthy.
The best part of an effective irrigation system is that you don’t need to drag your hose around and water your grass by hand or constantly adjust your sprinkler attachments. However, as with any plumbing and irrigation system, your yard could be costing you a lot of money by inflating your water bill.
Plus, a faulty system can diminish the health of your lawn and hurt its appearance. This is why you need to be proactive in detecting and addressing common plumbing problems you can spot in your yard.
5 Irrigation Plumbing Issues in Your Yard You Need to Address
A major cause for concern when it comes to irrigation problems, aside from your high water bill and poor lawn health, is the impact it can have on the structure of your home itself. Residential plumbing requires consistent monitoring and maintenance to prevent serious damages to your home.
For example, let’s say you sprung an irrigation leak near the foundation of your home. This leak, when left unchecked, can cause serious structural damage to your property.
To address a rising water bill and prevent long-term damage to your home, look out for these five irrigation plumbing issues:
1. A Leaking Hose
Your hose is obviously an essential tool you need to keep your lawn hydrated, as well as manage all kinds of yard maintenance, like clearing debris, cleaning out gutters, and more. Unfortunately, as wear and tear builds up over time, your hose is at risk of ripping and tearing.
This can cause leaks that can disrupt your outdoor chores while also causing significant water waste. Over time, even small punctures that cause minor leaks can really compound and increase your water bill dramatically.
Fortunately, fixing a leaking hose is pretty easy. Depending on the severity of the damage, you can embrace the following DIY solutions:
Fix small pinholes, which can be caused by sharp objects puncturing the hose, by turning off the water, then applying electrical tape to the hole. Overlap the tape several times around the hose to ensure it is properly sealed for the long term.
When larger tears occur (e.g., your hose is snagged by a bush or the hot summer days cause cracking), you can simply turn off the water, cut the torn section out with garden shears, then attach the cut ends to a hose mender. The mender has two collars that attach to each cut end. Once you tighten the mender, turn off the water to ensure any leak is sealed.
Couplings tend to leak, so when you notice one that is bent or damaged, you can simply replace it with a new hose coupling. Use a hose cutter to remove whichever coupling needs to be replaced, then insert the exposed end of the hose into the new coupling and twist the collar until it’s tight. Turn the water on to test it for any leaks.
Stay proactive with your hoses. There are plenty of ways to extend the life of your hose, like storing it in your garage to avoid exposure to extreme weather or using a hose cart to keep your hose lightly coiled and easy to transport.
2. The Pool Heater
Heating your pool is a must in the colder months of the year. Whether you use natural gas or propane, you can expect your home energy costs to increase for obvious reasons.
Simply put, the more your pool temperature drops, the more energy it takes to raise the temperature to your desired level. This will cost you even more money on energy if you don’t have a pool cover to keep the heat trapped.
To prevent skyrocketing utility bills, make sure you cover your pool at night or whenever it’s not in use to trap warmth. This way, your pool heater isn’t using a lot of energy to constantly increase the temperature of your pool. You can also adjust your desired temperature to a lower setting to reduce the amount of heat your heater needs to produce.
3. Irrigation Leaks
Water hose leaks are easy enough to find by simply inspecting your hose, but when you have a leak somewhere within your irrigation plumbing system, it might take you a little longer to find and address the issue.
The first step in identifying if you have an irrigation leak is to look at your water meter, specifically the low flow indicator to see if it’s moving when it’s not using water. If it is, you definitely have an irrigation leak.
Next, turn off your main sprinkler valve, then look at your low flow indicator on your meter again. If it keeps moving, your leak is likely inside your home. And if the indicator stopped moving, the leak is coming from your main sprinkler system pipe.
To do a visual inspection, turn the sprinkler system valve on again, then wait a few minutes for the main pipe to refill with water. Turn on one zone using your controller, then go to that zone. You will either hear water running or see it bubbling from the ground and pooling water.
Inspect the sprinkler head too so you can find out if you need to replace or repair the sprinkler head. This is a simple process that most homeowners can complete on their own. Repeat this inspection process until you find which zone is being impacted by your irrigation leak.
Once you find the leak and confirm that it’s not just a misaligned sprinkler head, turn off the valve and contact a professional plumber who can help. They can ensure you fix your leak correctly. If you try to do this yourself, you run the risk of not addressing the root cause of the leak.
4. Lateral Line Leaks
Another common problem that is driving up your utility bill could be your sewer line. Within your sewage system on your property, the lateral line is the pipe that carries the waste from your house to the public sewer main line, which is typically located in the street in your neighborhood.
When a sewage line leak goes undetected, this can lead to significant damage to your property. Over the course of time, that leak can cause sinkholes around your home, on sidewalks, or even in the road.
There are plenty of ways to detect a lateral line leak. First of all, you can simply find the smell of waste. A broken lateral line means sewage is being distributed underground somewhere. That odor will be detectable if the leak is significant.
You can also find pools of sewer water on your property, which will present a bad odor. If you’re experiencing drain clogs on a consistent basis, that also indicates a broken sewer pipe.
In order to determine the exact location of where you need sewer line repair, you should hire a plumbing company that provides residential plumbing leak detection. They can use a camera to navigate the sewer line to locate the leak, then fix the leak accordingly.
Finally, one of the most common problems is overwatering your property, which can be attributed to your sprinkler system. Overwatering can lead to weeds, insects, and diseases that will hurt the health of your lawn.
The most common signs of overwatering your lawn include:
You see water running off your lawn down the street.
You see too much thatch, which is a layer of partially decomposed plant material.
You notice more bugs hiding in your lawn.
You feel a sponginess on the surface of your yard.
Your lawn shows signs of discoloration, which is likely fungi.
You spot an excessive amount of weeds, like crabgrass.
Depending on your sprinkler system, you need to look at several aspects that may cause overwatering. For example, your runtimes may be too long, or you may not have the rain sensor turned on.
Start to adjust the amount of time you run your sprinkler system, then gauge it over the course of a few weeks. It’s best to reduce the amount upfront, then adjust as you see fit.
More Ways to Save Money on Irrigation
The faster you identify the aforementioned irrigation issues, the more you can save. And you can be even more proactive and make updates to your current irrigation plumbing system.
Invest in Pipe Bursting
This is a newer plumbing technique that incorporates machines that split your existing pipes. It pulls a pipe bursting head through the existing pipe to split it, while pulling the new pipe inside.
Pipe bursting replaces your existing pipelines without actually removing the old ones. This process is way less destructive to your yard, and it can be used to even upsize your pipelines, which increases the amount of flow capacity in your irrigation system.
Invest in Trenchless Pipe Lining
You can adopt this trenchless approach to upgrade your current systems in a way that doesn’t damage your yard. The trenchless pipe lining process is fast, so you don’t have to worry about downtime.
Plus, the new pipe lining is smooth and comes with an extended lifespan. Depending on the plumbing company you hire, the resin that is applied as a new pipe liner can come with a guarantee of at least 50 years.
As you can see, some irrigation plumbing issues can be addressed quickly and on your own. But others are far more complicated and involved, which requires plumbing experts. You can also invest in updating your current irrigation systems using pipe bursting and trenchless pipe lining, saving you big on preventative maintenance over the long term.